Modifying other Modules |
WARNING: This is neither a joke nor is it intended for Beginners or Wanna-Bees. All Tips given and all the described modifications are 'On Own Risk' The Maintainer will give no warranty of any kind ! Read the entire article first, before you begin ! |
People asked if there isn't a way to use more generic modules with PS/2.
Here's a quick guideline for modifying the more common modules. |
Schematic Diagrams I still do love ASCII-graphics ! |
Let's get started with the modification on a "generic industrial 8MB / 60ns True Parity" SIMM - to convert it into an 8MB / 70ns parity as used in all Model 56 / 57, all 76 / 77, all 85, 90 / 95. The equivalent IBM FRU were 6450130 or 92G7202 in this case. Our modul will nicely fit as substitute for these. |
The Module is 1" high and Double-Sided Has 16 large and 8 smaller chips (8 / 4 per side) +------------------------------------------------------------------------+ | ####### ####### ####### ####### ####### ####### ####### ####### | | ####### ####### ####### ####### ####### ####### ####### ####### | | ####### ####### ####### ####### ####### ####### ####### ####### | | ####### ####### ####### ####### ####### ####### ####### ####### | | ####### ####### ####### ####### ####### ####### ####### ####### | | ####### ####### ####### ####### ####### ####### ####### ####### | | o o | | ############ ############ ############ ############ o o | | ############ ############ ############ ############ o o | | ############ ############ ############ ############ o o | +-+ | |1 ||||||||||||||||||||||||||||| __ |||||||||||||||||||||||||||| 72 | +--------------------------------+ +----------------------------------+ PD0 67 72 GND PD1 68 72 " PD2 69 72 " PD3 70 72 " (Fig. 1 : industrial 8MB / 60ns P. before modification) +------------------------------------------------------------------------+ | ####### ####### ####### ####### ####### ####### ####### ####### | | ####### ####### ####### ####### ####### ####### ####### ####### | | ####### ####### ####### ####### ####### ####### ####### ####### | | ####### ####### ####### ####### ####### ####### ####### ####### | | ####### ####### ####### ####### ####### ####### ####### ####### | | ####### ####### ####### ####### ####### ####### ####### ####### | | o o | | ############ ############ ############ ############ o o | | ############ ############ ############ ############ o=o | | ############ ############ ############ ############ o o | +-+ | |1 ||||||||||||||||||||||||||||| __ |||||||||||||||||||||||||||| 72 | +--------------------------------+ +----------------------------------+ PD0 67 72 GND PD1 68 72 " connect these pins: PD2 69 72 " PD3 70 72 " (Fig. 2 : industrial 8MB / 60ns P. after modification) |
The next one is the "generic industrial 16MB / 60ns True Parity" module. The principle is the same - make connections according to the chart in on the "Presence Detection" page. The result after the modification matches the specs for the IBM 16MB modules FRU 60G1622 or 92F7204. |
The Module is 1" high and Double-Sided The Module is *much wider* than 8/4/2MB modules ! Has 18 chips on either side +-----------------------------------------------------------------------------+ |##### ##### ##### ##### ##### ##### ##### ##### ##### ##### ##### ##### #####| |##### ##### ##### ##### ##### ##### ##### ##### ##### ##### ##### ##### #####| |##### ##### ##### ##### ##### ##### ##### ##### ##### ##### ##### ##### #####| |##### ##### ##### ##### ##### ##### ##### ##### ##### ##### ##### ##### #####| |##### ##### ##### ##### ##### ##### ##### ##### ##### ##### ##### ##### #####| |##### ##### ##### ##### ##### ##### ##### ##### ##### ##### ##### ##### #####| |##### ##### ##### ##### ##### ##### ##### ##### ##### ##### ##### ##### #####| | ########### ########## ########### ########## ########### oo | | ########### ########## ########### ########## ########### oo | | ########### ########## ########### ########## ########### oo | +---+ oo +--+ |1 ||||||||||||||||||||||||||||| __ |||||||||||||||||||||||||||| 72 | +--------------------------------+ +----------------------------------+ 67 68 72 72 72 72 69 70 (Fig. 3 : industrial 16MB / 60ns P. before modification) +-----------------------------------------------------------------------------+ |##### ##### ##### ##### ##### ##### ##### ##### ##### ##### ##### ##### #####| |##### ##### ##### ##### ##### ##### ##### ##### ##### ##### ##### ##### #####| |##### ##### ##### ##### ##### ##### ##### ##### ##### ##### ##### ##### #####| |##### ##### ##### ##### ##### ##### ##### ##### ##### ##### ##### ##### #####| |##### ##### ##### ##### ##### ##### ##### ##### ##### ##### ##### ##### #####| |##### ##### ##### ##### ##### ##### ##### ##### ##### ##### ##### ##### #####| |##### ##### ##### ##### ##### ##### ##### ##### ##### ##### ##### ##### #####| | ########### ########## ########### ########## ########### xo | | ########### ########## ########### ########## ########### xo | | ########### ########## ########### ########## ########### xo | +---+ xo +--+ |1 ||||||||||||||||||||||||||||| __ |||||||||||||||||||||||||||| 72 | +--------------------------------+ +----------------------------------+ 67 68 72 72 72 72 69 70 (Fig. 4 : industrial 16MB / 60ns P. after modification) |
From the principle this should work with any sort of "4 / 8 / 16MB / 60ns Fast Page Modules with Parity" (36-bit). They often sell for half the price "special PS/2" SIMMs are sold for. The rework is in most cases very easy - assumed the module has the soldering spots present. Most modules -that I know- have them. Good luck ! |
Go to MCA-Index | |
Visit my Homepage |
© 1997 by Peter H. Wendt / pw-software production